HTC DURATIQ Operation
36 www.htc-floorsystems.com
D002998, 01.06
Raise the handle to the third position in
accordance with the Handle Settings page
32.
Lower the weights back and place a foot on
one of the weights. See Handling weights
page 33.
The machine may be heavy. Using the fine
adjustment makes it easier to adjust the
settings, see Handle Settings page 32.
Carefully, tip the machine backwards, until
the weights reach the floor.
Tip the machine further back, until all of the
machine reaches the floor.
Ensure that the machine lies supported on
the handle.
5.6 Fitting Grinding Tools
WARNING
High Temperature
Risk for Dust
NOTE
Note the direction of rotation of the grinding discs.
To Next Page
Loading...
