HTC DURATIQ Accessories
48 www.htc-floorsystems.com
D002998, 01.06
Grinding
Set the grinding speed using the knob (10). The set value
can be seen on the display.
Set the propulsion speed using the knob (11). The set value
can be seen on the display.
Choose direction of rotation (12) for grinding. The machine
starts grinding.
Select driving direction with the lever FWD/REV (13).
Control the speed (15) as needed. Can increase 2x and
change direction at the same speed as max.
Adjust the offset for grinding using the knob (14) as needed.
To Next Page
Loading...
