Figure 7-20 Configured cell and channels
Step 8 Choose Site0 > Site Opstart > OK. The Site Opstart dialog box is displayed, as shown in
Figure 7-21.
If...
Then...
Site Opstart successfully is displayed Click Close and proceed with the next step.
Site operation start fails
1. Repeat Step 8. If the operation succeeds, go to
Step 9. If the operation fails, go to 8.2.
2. Check whether data configuration conflict exists.
If there is configuration conflict, modify the
configuration. If the configuration is incorrect,
turn to GBTS engineers for help.
7 Commissioning the MBTS by Using Local Maintenance
Terminal and M2000
3900 Series Multi-Mode Base Station
Commissioning Guide
7-24 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 02 (2010-07-30)
To Next Page
Loading...
Need help?
General
