l If a NodeB passes the service verification, the status of its commissioning task
automatically changes to Waiting for Acknowledgement. In such a case, you need to
manually confirm that the commissioning is complete.
l The M2000 automatically clears the service verification measurement data that is generated
two weeks ago. This avoids a large amount of unnecessary history data on the M2000 server.
Procedure
Step 1 Choose Configuration > Auto Deployment > NodeB Auto Deployment to open NodeB Auto
Deployment.
Step 2 Right-click the commissioning task whose alarms are to be viewed, and then choose Open
Service Verification Window from the shortcut menu.
In the displayed window, you can view the verification result of each cell and the accumulated
values of all the performance counters based on cells. For details about the service verification
window, see 5.13.1 Interface Description: NodeB Commissioning.
----End
Service Verification Rules
l If the value of a single performance counter is not 0 during the service verification, it
indicates that this counter has passed the verification.
l If all the performance counters of a cell have passed the verification, it indicates that this
cell has passed the verification.
l If all the logical cells of a NodeB have passed the verification, it indicates that this NodeB
has passed the verification.
5.6.4 Performing a NodeB Task Again or Deleting the Task
When a NodeB commissioning task is running, you can perform this task again or delete this
task.
Prerequisite
The NodeB deployment list is imported successfully.
Context
When the NodeB version software is being downloaded, the restart is performed after the FTP
service is complete. Therefore, you need to wait for a certain period to view the operation result
on the M2000.
Procedure
Step 1 Choose Configuration > Auto Deployment > NodeB Auto Deployment to open NodeB Auto
Deployment.
Step 2 In the commissioning task list, select the commissioning task to be performed again or deleted.
You can select multiple commissioning tasks.
Step 3 Right-click a commissioning task, and then choose the required menu item from the shortcut
menu.
3900 Series Multi-Mode Base Station
Commissioning Guide
5 Commissioning the MBTS in GL or UL Mode on the
M2000
Issue 02 (2010-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5-31
To Next Page
Loading...
Need help?
General
