Huawei AR120 Series - Page 37

Context
DANGER
To avoid electric shock, do not connect power cables while the power is on.
NOTICE
l Do not power on the router before you finish connecting the power cables.
l Each router has its own power cables delivered as accessories. The power cables can only
be used on the router in the same package and cannot be used on any other device.
NOTE
The AC power cable parameters vary in different countries or regions. The figures in this section are for
reference only and may differ from the cables delivered.
Tools and Accessories
l ESD wrist strap
l Power adapter
l AC Power Cable
l AC terminal locking latch
Procedure
Step 1 Verify that the router is reliably grounded.
Step 2 Wear an ESD wrist strap. Ensure that the ESD wrist strap is grounded and in a close contact
with your wrist.
Step 3 Connect the power adapter.
NOTE
The router does not have a power switch, and its power supply is controlled by the power switch of the
external power supply system.
1. Connect one end of the power adapter to the power socket on the router.
2. Connect the other end of the power adapter to an AC power outlet.
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
4 Installing AR100/AR120/AR150/AR160/AR200 Series
Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
31