Huawei AR120 Series - Installing Cards

Figure 7-4 Installing an AR3260 into a cabinet
b
a
----End
7.2 Installing Cards
Context
NOTICE
l All cards are hot swappable.
l Vacant slots in the router must be covered with filler panels.
l When installing a card, slowly push it into the slot. If you feel resistance or find the card
inclined, pull the card out and push it into the slot again. Do not push the card with force;
otherwise, the connectors on the card and backplane may be damaged.
l A card can only be installed in a router that supports this card. For the specific cards
supported by different routers, see Cards in the Hardware Description.
Tools and Accessories
l ESD wrist strap
l Phillips screwdriver
Procedure
Step 1 Wear an ESD wrist strap. Ensure that the ESD wrist strap is grounded and in a close contact
with your wrist.
Step 2 Loosen the captive screw on the filler panel and remove the filler panel.
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
7 Installing AR2240/AR2240C/AR3260/AR3670 Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
102