5 Installing AR2201-48FE/AR2202-48FE
Routers
About This Chapter
5.1 Installing the Router into a Cabinet
5.2 Installing an RPS150 Power Supply
5.3 Connecting the Router
5.4 Powering On and Off the Router
5.1 Installing the Router into a Cabinet
Context
NOTICE
l Leave at least 50 mm of clearance around the router for heat dissipation.
l Seen from the front panel of the router, the airflow of the router is left to right.
l If multiple routers are installed in a cabinet, it is recommended that at least 1 U of space (1
U = 44.45 mm) be kept between two routers. These routers must have the same airflow
direction; otherwise, heat dissipation is affected by hot air circulation.
Make sure the following before the installation:
l The cabinet is well fixed.
l The router installation position in the cabinet is determined and arranged properly.
l The router to be installed is available and located near the cabinet for convenient
movement.
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
5 Installing AR2201-48FE/AR2202-48FE Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
36
To Next Page
Loading...
