Huawei AR120 Series - Page 43

Tools and Accessories
l Phillips screwdriver
l Flat-head screwdriver
l Floating nuts
l Mounting brackets
l M4 screws
l M6 screws
Procedure
Step 1 Use a Phillips screwdriver to fix the mounting brackets to both sides of the router with M4
screws.
NOTE
The mounting brackets can be installed on both sides close to the front panel or rear panel.
Step 2 Install two floating nuts on each front mounting rail. Leave a mounting hole between the two
floating nuts on the same mounting rail.
NOTE
l The length of three adjacent mounting holes may not be 1 U. Observe the scale ticks on the
mounting rails when installing floating nuts.
l You can use a flat-head screwdriver to install floating nuts.
h4
1U
Step 3 Move the router into the cabinet. Support the bottom of the router with one hand and tighten
the M6 screws on the mounting brackets with the other hand. Tighten the lower screws first,
and then the upper screws.
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
5 Installing AR2201-48FE/AR2202-48FE Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
37