Huawei AR120 Series - Connecting the AC Power Cable

PWR
AR2200 Series
EN
EN
CON/AUX
ACTL/A
GE1
GE0
MANAGE
SYS
WAN
RPS
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47
Optical fibers
Optical interface of
the remote device
L/A
Step 5 Arrange the optical fibers to make them parallel and bundle them with fiber binding tape at an
interval of 150 mm to 300 mm.
Step 6 Replace all the temporary labels with formal labels on the optical fibers.
----End
5.3.5 Connecting the AC Power Cable
Context
DANGER
To avoid electric shock, do not connect power cables while the power is on.
NOTICE
l Do not power on a router before you finish connecting power cables and network cables.
l Each router has its own power cables delivered as accessories. The power cables can only
be used on the router in the same package and cannot be used on any other device.
NOTE
The AC power cable parameters vary in different countries or regions. The figures in this section are for
reference only and may differ from the cables delivered.
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
5 Installing AR2201-48FE/AR2202-48FE Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
50