Huawei AR120 Series - Connecting Ethernet Cables

d. Click Open. The router copyright statement is displayed. Enter the default user
account admin and password Admin@huawei as prompted to log in to the CLI of
the router.
5.3.3 Connecting Ethernet Cables
Context
NOTICE
l Do not power on the router before you finish connecting cables.
l Notice flags on interfaces when connecting cables. Incorrect cable connection may
damage interface modules or the router.
Tools and Accessories
l Diagonal pliers
l Cable ties
l Marker
l Network cables (separately purchased)
l Network cable labels
Procedure
Step 1 Select Ethernet cables of appropriate quantity and lengths according to the number of ports
and measured cabling distances.
Step 2 Attach temporary labels to both ends of each Ethernet cable and write numbers on the labels
to identify the Ethernet cables. For details, see 9.5.3 Engineering Labels for Network
Cables.
Step 3 Lead the Ethernet cables into the cabinet from the top cable inlet (for overhead cabling) or
bottom cable inlet (for on-ground cabling), and route the cables from one side of the cabinet.
Step 4 Connect one end of an Ethernet cable to an Ethernet interface of the router and the other end
to an Ethernet interface of the remote device.
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
5 Installing AR2201-48FE/AR2202-48FE Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
47