Huawei AR120 Series - Page 52

following describes how to set the serial port communication software on the Windows XP
and Windows 7 operating systems.
l Windows XP
a. Start HyperTerminal provided by the Windows system or a third-party serial port
communication program on the management PC.
b. Create a connection, select a serial port, and configure the following parameter
settings:
n Bits per second: 9600
n Data bits: 8
n Parity: None
n Stop bit: 1
n Flow control: None
c. Click OK. The router copyright statement is displayed on the HyperTerminal. Enter
the default user account admin and password Admin@huawei as prompted to log
in to the CLI of the router.
l Windows 7
The Windows 7 operating system does not provide the HyperTerminal. You can
download free HyperTerminal software, such as PuTTY, from the Internet. The
following example describes how to use the PuTTY software.
a. Download the PuTTY software to the PC and double-click it to run the software.
b. Select Session and set Connection type to Serial.
c. Set serial port parameters.
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
5 Installing AR2201-48FE/AR2202-48FE Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
46