Procedure
Step 1 Hold down the release button on the left side of the filler panel and pull out the filler panel.
Step 2 Take out the hard disk holder from the accessory package, and use a Phillips screwdriver to
fix the hard disk in the holder with M3 screws.
NOTE
The tightening torque for the M3 screws should be 3.5±0.5 kgf•cm. Excessive tightening torque will
distort or damage the hard disk holder.
Step 3 Open the locking latch of the hard disk holder and insert the hard disk into the router.
Step 4 Close the locking latch to lock the hard disk in the router.
Huawei
AR100&AR120&AR150&AR160&AR200&AR1200&AR
1600&AR2200&AR3200&AR3600 series Enterprise
Routers
Hardware Installation and Maintenance Guide
6 Installing the AR1200 Series/AR2204/AR2220E/
AR2220/AR2204E Series Routers
Issue 05 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
70
To Next Page
Loading...
