Step 4 Run the following commands as required.
l Run:
header-folding enable
Header folding in the authentication header field is enabled.
l Run:
field-header max-forwards max-forwards-value
The value of the Max-forwards header field is set.
l Run:
field-header organization organization-head
The value of the Organization header field is set.
l Run:
field-header server server-head
The value of the Server header field is set.
l Run:
field-header user-agent user-agent-head
The value of the User-agent header field is set.
----End
Checking the Configuration
After the configuration is complete, you can view the configured SIP stack parameters.
Procedure
l Run the display voice sip command to check the user-defined ring.
----End
Example
Run the display voice sip command to check the configured SIP stack parameters.
<Huawei> display voice sip
SIP stack parameter & timers:
Server Header Field :
Organization Header Field :
User-agent Header Field :
Max-forwards Header Field : 70
Headline-Folding-Flag : Disable
Entity Based Session Timer Flag : Disable
T1 Timer(Unit:ms) : 500
T2 Timer(Unit:ms) : 4000
T4 Timer(Unit:ms) : 5000
TD Timer(Unit:ms) : 32000
Min-SE Timer(Unit:s) : 90
Session Progress Timer(Unit:s) : 180
Session Reliable Progress Timer(Unit:s): 60
1.6.3 Setting DSP Parameters
This section describes how to set DSP parameters.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice 1 SIPAG Configuration
Issue 03 (2011-09-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
34
To Next Page
Loading...
