EasyManua.ls Logo

Huawei AR1200 Series - Configuring the AR1200 to Work in SIP AG Mode

Huawei AR1200 Series
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Service Type Introduction Configure
d on the
SIP AG or
Not
Differentiated
ringback tone
service
The differentiated ringback tone service enables the SIP
AG to play different ring tones for ringback tones.
No
Advice of charge
(AoC) service
The AoC service enables the SIP AG to display the
charge rate, fee notification during a call, and the total
fee of the call.
No
Polarity reversal
charging service
The polarity reversal charging service notifies the
accounting terminal of the starting point and stop point
of accounting using polarity reversal when users are in
a conversation or end the conversation.
No
Polarity reversal
pulse charging
service
When users are in a conversation or end the
conversation, a polarity reversal pulse is generated on
an interface, notifying the accounting terminal of the
starting point and stop point of accounting.
No
Urgent call process If the SIP AG finds an urgent call, the SIP AG inserts
the urgent call flag into the SIP message.
No
Completion of
Calls to Busy
Subscriber (CCBS)
service
When the called number is busy, the CCBS service
enables the SIP AG to monitor the called party status.
When the called party is idle, the SIP AG notifies the
calling party and determines whether to make a call
according to the status of the calling and called parties.
No
Multiple MSN
numbers on a
POTS interface
Multiple MSN numbers can be configured on a POTS
interface.
No
Hotline service
l Instant hotline service: After a user picks up a phone,
the SIP AG dials the hotline number for the user.
l No dialing within a long time after picking up the
phone: If a user does not dial any number within the
specified period of time after picking up the phone,
the SIP AG dials the hotline number for the user.
No
Anonymous call
service
The anonymous call service enables the called party not
to view information about incoming calls.
No
1.3 Configuring the AR1200 to Work in SIP AG Mode
Before configuring SIP AG service features, configure the AR1200 to work in SIP AG mode.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice 1 SIPAG Configuration
Issue 03 (2011-09-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5

Other manuals for Huawei AR1200 Series

Related product manuals