Huawei AR1200 Series - Maintaining a SIP AG; Clearing SIP AG Statistics

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
voice
The voice view is displayed.
Step 3 Run:
sipag mgid
The SIP AG view is displayed.
Step 4 Run:
reset
The SIP AG view is reset.
CAUTION
Exercise caution when you run this command because resetting a SIP AG interrupts running
services.
----End
1.9 Maintaining a SIP AG
This section describes how to maintain a SIP AG.
1.9.1 Clearing SIP AG Statistics
Context
CAUTION
The cleared SIP AG statistics cannot be restored. Exercise caution when you run reset
commands.
Procedure
Step 1 Run the reset sctp-association-statistics command in the SIP AG view to clear statistics about
SCTP associations on a SIP AG.
Step 2 Run the reset sctp-global-statistics command in the user view to clear global SCTP statistics.
----End
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice 1 SIPAG Configuration
Issue 03 (2011-09-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
55