EasyManua.ls Logo

Huawei AR1200 Series - Displaying System Status Messages

Huawei AR1200 Series
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
l Run the display voice dsp-dimm state command to check the status of a DSP or DSP
channel.
l Run the display voice dsp-template command to check the DSP template configuration.
----End
Example
Run the display voice dsp command to check the DSP parameters.
<Huawei> display voice dsp
DSP code type : G711A
DSP RTP packet interval(ms) : 10
T30 redundancy parameter value of T38 fax : 3
T4 redundancy parameter value of T38 fax : 3
Fax train mode : Local train
Fax max train rate : V17
Fax V8 negotiate : Disable
DSP min adapted jitter buffer(ms) : 2
DSP max adapted jitter buffer(ms) : 135
DSP init adapted jitter buffer(ms) : 2
DSP adapted jitter buffer threshold(ms) : 150
DSP min fixed jitter buffer(ms) : 2
DSP max fixed jitter buffer(ms) : 135
DSP init fixed jitter buffer(ms) : 60
DSP redundancy payload value : 96
DSP NTE payload value : 97
DSP clearmode payload value : 100
DSP G.726-16k payload value : 103
DSP G.726-24k payload value : 104
DSP G.726-32k payload value : 101
DSP G.726-40k payload value : 105
DSP VBD payload value : 102
VQM : Disable
RTCP package send interval time(ms) : 5000
RTCPXR : Enable
Severe degrade second threshold : 400
DSP echo check : On
DSP packet lose compensate : Off
DSP silence reduce : Off
DSP auto VBD : Host control
Workmode Threshold1 Threshold2 Threshold3
Normal
1.7 Configuring a SIPAG User
This section describes how to configure a SIPAG user.
1.7.1 Establishing the Configuration Task
Before configuring a SIP AG user, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the data required for the configuration. This
will help you complete the configuration task quickly and accurately.
Applicable Environment
On the IMS, a SIP AG is directly connected to a user terminal. You need to set parameters for
users on the SIP AG so that the users can use services on the IMS.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - Voice 1 SIPAG Configuration
Issue 03 (2011-09-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
46

Other manuals for Huawei AR1200 Series

Related product manuals