Procedure
l Run:
startup saved-configuration configuration-file
Configuration file is saved for the router to load next time on startup.
----End
7.3.4 Checking the Configuration
After specifying a file for system startup, you can check the contents of the configuration file to
be loaded and the information about the file to be used during the next startup on the router.
Prerequisite
The file has been specified for system startup.
Procedure
l Run the display current-configuration [ configuration [ configuration-type
[ configuration-instance ] ] | controller | interface [ interface-type [ interface-number ] ] ]
[ feature feature-name [ filterfilter-expression ] | filterfilter-expression ] command to
check current configurations.
l Run the display saved-configuration [ last | time ] command to check the contents of the
configuration file to be loaded during the next startup.
l Run the display startup command to check information about the files to be used during
the next startup.
----End
Example
Run the display startup command to check information about the files to be used during the
next startup.
<Huawei> display startup
MainBoard:
Startup system software: usb0:/ar0210_30735_1220.cc
Next startup system software: usb0:/ar0210_30735_1220.cc
Backup system software for next startup: null
Startup saved-configuration file: flash:/arcfg.zip
Next startup saved-configuration file: flash:/arcfg.zip
Startup license file: null
Next startup license file: null
Startup patch package: null
Next startup patch package: null
Startup voice-files: null
Next startup voice-files: null
7.4 Configuration Examples
This section provides an example for configuring system startup.These configuration examples
explain networking requirements, configuration roadmap, and configuration notes.
Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration 7 Configuring System Startup
Issue 02 (2011-10-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
119
To Next Page
Loading...
