Huawei AR2200 Series - Setting Terminal Attributes of Console User Interface

By default, the data bit is 8.
----End
4.2.3 Setting Terminal Attributes of Console User Interface
This section describes how to set terminal attributes of the console user interface, including the
user timeout disconnection function, number of lines displayed in a terminal screen, and size of
the history command buffer.
Context
Terminal attributes of the console user interface have default values on the router and you can
set them as needed.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
user-interface console interface-number
The console user interface view is displayed.
Step 3 Run:
shell
The terminal service is started.
Step 4 Run:
idle-timeout minutes [ seconds ]
The idle timeout period is set.
If the connection keeps idle within the timeout period, the system automatically terminates the
connection.
By default, the idle timeout period on the user interface is 10 minutes.
Step 5 Run:
screen-length screen-length [temporary]
The length of a terminal screen is set.
The parameter temporary is used to display the number of lines to be temporarily displayed on
a terminal screen.
By default, the length of a terminal screen is 24 lines.
Step 6 Run:
history-command max-size size-value
The history command buffer is set.
By default, the size of history command buffer on a user interface is 10 entries.
----End
Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration 4 Configuring User Interface
Issue 02 (2011-10-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
35