Networking Requirements
As shown in Figure 8-11, the IP address of the TFTP server is 10.111.16.160/24.
Log in to the router from the HyperTerminal and then download the file ar.cc from the TFTP
server.
Figure 8-11 Networking diagram of configuring TFTP
TFTP Client
TFTP Server
PC
10.111.16.160/24
Configuration Roadmap
The configuration roadmap is as follows:
1. Run the TFTP application on the TFTP server, and set the location of the file on the server.
2. Use the TFTP command on the router to download the file.
3. Use the TFTP command on the router to upload the file.
Data Preparation
To complete the configuration, you need the following data:
l The TFTP application installed on the TFTP server
l The path of the file on the TFTP server
l The destination file name and its path on the router
Procedure
Step 1 Start the TFTP server, and set its Current Directory as the directory where the ar.cc file resides.
Figure 8-12shows the interface.
Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration 8 Accessing Another Device
Issue 02 (2011-10-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
162
To Next Page
Loading...
