Huawei AR2200 Series - Checking the Configuration; Logging in to the Devices by Using Telnet

5.2.4 Checking the Configuration
After a user logs in through a console port, the user can view information on the console user
interface, such as use information, physical attributes and configurations, local user list, and
online users.
Prerequisite
Configurations of user login through a console port are complete.
Procedure
l Run the display users [ all ] command to check information about the user interface.
l Run the display user-interface console ui-number1 [ summary ] command to check
physical attributes and configurations of the user interface.
l Run the display local-user command to check the local user list.
----End
Example
Run the display users command, and you can view information about the current user interface.
<Huawei> display users
User-Intf Delay Type Network Address AuthenStatus AuthorcmdFlag
0 CON 0 00:00:44 pass no
Username : Unspecified
Run the display user-interface console ui-number1 [ summary ] command, and you can view
the physical attributes and configurations of the user interface.
<Huawei> display user-interface console 0
Idx Type Tx/Rx Modem Privi ActualPrivi Auth Int
0 CON 0 9600 - 3 - N -
+ : Current UI is active.
F : Current UI is active and work in async mode.
Idx : Absolute index of UIs.
Type : Type and relative index of UIs.
Privi: The privilege of UIs.
ActualPrivi: The actual privilege of user-interface.
Auth : The authentication mode of UIs.
A: Authenticate use AAA.
N: Current UI need not authentication.
P: Authenticate use current UI's password.
Int : The physical location of UIs.
Run the display local-user command, and you can view the local user list.
<Huawei> display local-user
----------------------------------------------------------------------------
User-name State AuthMask AdminLevel
----------------------------------------------------------------------------
admin A H -
ftp A F -
guest A A 15
----------------------------------------------------------------------------
Total 3 user(s)
5.3 Logging in to the Devices by Using Telnet
If multiple routers need to be configured and managed, you do not need to connect the routers
and maintain them locally one by one. Instead, you can log in to the routers from a terminal by
Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration 5 Configuring User Login
Issue 02 (2011-10-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
60