Figure 1-3 Communication parameter setting
Step 4 Press Enter. A command line prompt such as <Huawei> appears, and the system asks you to
configure the router. You can enter a command to configure the router. Enter a question mark
(?) whenever you need help.
NOTE
When you connect to the Console port of a AR2200 that does not have a startup configuration file, the
system displays "Warning: Auto-Config is working. Do you want to stop Auto-Config? [y/n]:"
l To continue Auto-Config, enter n and press Enter.
l To stop Auto-Config, choose y and press Enter.
CAUTION
If you choose n but still perform configurations through the Console port, the DHCP, routing, DNS,
and VTY configurations that you have performed will be lost.
----End
Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration 1 Logging In to the System for the First Time
Issue 02 (2011-10-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5
To Next Page
Loading...
