Huawei AR2200 Series - Page 194

Procedure
Step 1 Log in to the router from the console port. For details, see 1.2 Logging In to the Device Through
the Console Port or Mini USB Port.
Step 2 Restart the router. Press Ctrl+B to enter the BootROM menu when the following information
is displayed.
Sep 16 2011,17:14:28
Copying Data : Done
Uncompressing : Done
Initializing SMI Bus:OK
Init flash, please wait......
Base Address: 0xfffffffffc000000
Size is: 0x20000000OK
flash drv init.
Initializing FlashPiece Module:
FlashPiece start offset at: 0x300000
FlashPiece size is: 0x100000
Initializing FlashDynamic Module:
FlashDynamic start offset at: 0x400000
FlashDynamic size is: 0x200000
Initializing I2C Bus:OK
USB2 Host Stack Initialized.
USB Hub Driver Initialized
USBD Wind River Systems, Inc
EHCI Controller found.
Waiting to attach to USBD...0xbfffdf0 (tRootTask): usb1_base = 0xbff22000Done.
0xbfffdf0 (tRootTask): usbBulkDevInit() returned OK
Press Ctrl+B to break auto startup ... Attached TCP/IP interface to teth1.
NOTE
l If a password is configured, you must enter the password after pressing Ctrl+B to display the BootROM
menu (the default password is huawei ).
l You can change the password under the BootROM menu. Make a note of your password and keep it
in a safe place. The password cannot be restored if it is lost.
Step 3 Select choice 3 to enter the network menu.
Enter Password:
Main Menu
1. Default Startup
2. Serial Menu
3. Network Menu
4. Startup Select
5. File Manager
6. Reboot
Enter your choice(1-6):3
Step 4 Select choice 2 to modify the parameter.
NetWork Menu
1. Display parameter
2. Modify parameter
3. Save parameter
4. Download file
0. Return
Enter your choice(1-10): 2
Set the FTP type, resource file name, management interface address, FTP server address, and
FTP user name and password.
Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration 9 Upgrade and Maintenance
Issue 02 (2011-10-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
183