Step 4 Save the configuration file and restart the device.
# Save the configuration file.
<HuaWei> save
The current configuration will be written to the device.
Are you sure to continue? [Y/N]:y
It will take several minutes to save configuration file, please wait...
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
# Restart the device.
<HuaWei> reboot
Info: The system is comparing the configuration, please wait.
Warning: All the configuration will be saved to the next startup configuration.
Continue ? [y/n]:y
It will take several minutes to save configuration file, please wait........
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
System will reboot! Continue ? [y/n]:y
Info: system is rebooting ,please wait...
Step 5 Verify the configuration.
After the device has been restarted, run the display version command. You can view that the
current system software is a new version. It means that the system software upgrade is successful.
<Huawei> system-view
[Huawei] sysname HuaWei
[HuaWei] display version
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.90 (AR2200 V200R001C00)
Copyright (C) 2000-2010 Huawei Technologies Co., LTD
Huawei AR2240 Router uptime is 0 week, 0 day, 3 hours, 59 minutes
BKP 0 version information:
1. PCB Version : AR01BAK1A VER.C
2. If Supporting PoE : Yes
3. Board Type : AR2240
4. MPU Slot Quantity : 1
5. LPU Slot Quantity : 2
MPU 0(Master) : uptime is 0 week, 0 day, 3 hours, 59 minutes
Flash Memory Size : 16 M bytes
NVRAM Memory Size : 512 K bytes
SD Card1 Memory Size : 1887 M bytes
MPU version information :
1. PCB Version : AR01SRU1A VER.A
2. MAB Version : 0
3. Board Type : AR2240
4. CPLD1 Version : 100
5. BootROM Version : -
LPU 1 : uptime is 0 week, 0 day, 3 hours, 53 minutes
SDRAM Memory Size : 256 M bytes
Flash Memory Size : 64 M bytes
LPU version information :
1. PCB Version : AR01SDCE2A VER.A
2. MAB Version : 0
3. Board Type : 2T1/T1-
M
4. CPLD1 Version : 0
5. CPLD2 Version : 0
6. BootROM Version : 906
LPU 2 : uptime is 0 week, 0 day, 3 hours, 53 minutes
SDRAM Memory Size : 256 M bytes
Flash Memory Size : 64 M bytes
LPU version information :
Huawei AR2200 Series Enterprise Routers
Configuration Guide - Basic Configuration 9 Upgrade and Maintenance
Issue 02 (2011-10-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
198
To Next Page
Loading...
