LTE CPE B2368 User's
Guide 15 VoIP
Issue 01 Copyright © Huawei Technologies Co., Ltd. 118
Item Description
in the event that
no answer is
active
that number does not match)
The number, type the field Number right. The number, type the field Number right. The number, type the field Number right.
Ring time if the
number does not
match
This field is important if it is active Redirection feature in case no answer.This field is important if it is active Redirection feature in case no answer.
Enter the number of seconds expressing the desired length of time, after which the call
will be considered adopted.
Allow
anonymous call
blocking
Check this box if you do not want your phone to ring when an incoming
call, the caller identification.
Configuring detection interval flash
Allow
configuration
interval
Using tap you can control certain functions during a call. The settings in this section
to manually enter such a double-detection interval (how long press LTE devices will
be regarded as signaling flash).
If the configuration is not allowed interval, the interval will be set to flash detection
in accordance with the regional specifications set menu VoIP> Phone> Region.in accordance with the regional specifications set menu VoIP> Phone> Region.
Value upper limit
detection for tap /
flash
Enter the longest interval to be considered flash modem. Once this period is exceeded,
it will be interpreted as LTE modem hook call.
Detection lower
limit value of the
tap / flash
Enter the shortest interval that is considered a flash modem.
Use Clicking Use save your changes. Clicking Use save your changes. Clicking Use save your changes.
back
Clicking back to return to the previous screen without saving. Clicking back to return to the previous screen without saving. Clicking back to return to the previous screen without saving.
15.4 Screen Region
On this screen, you can adjust the settings, which differ depending on the country you are LTE modem. To
access this screen, click on VoIP> Phone> Region.access this screen, click on VoIP> Phone> Region.
To Next Page
Loading...
Need help?
General
