Need help?Do you have a question about the Huawei B2368-22 and is the answer not in the manual?
Accessing the Internet via the LTE network and supported frequency bands.
Procedures for restarting and restoring the device to factory settings.
Step-by-step guide to accessing the modem's web interface and login.
Viewing network status, connected devices, and warning messages.
Displaying detailed system information, interfaces, and SIP accounts.
Adjusting WAN interface settings for broadband connection.
Managing the SIM card status and PIN settings for the LTE modem.
Configuring WPA/WPA2-PSK for robust wireless network security.
Using WPS for easy and secure wireless network setup.
Configuring LAN settings, IP address, DHCP server, and DNS values.
Viewing and configuring IPv4 static routing rules for the LTE modem.
Setting up port forwarding to make local services accessible from the WAN.
Enabling or disabling the firewall and selecting security policies.
Managing Access Control List (ACL) rules for incoming and outgoing data streams.
Adding or editing ACL rules to filter network traffic based on various criteria.
Configuring MAC address filtering to allow or deny access to specific devices.
Creating or editing GRE VPN tunnels with specified parameters.
Setting SIP server information and other parameters for VoIP calls.
Activating and configuring SIP accounts for outbound VoIP calls.
Performing software upgrades via the Device Management interface.
Updating firmware via the Internet through the Device Management interface.
Step-by-step process for updating firmware via the Internet.
Performing configuration backup, restore, and factory reset operations.
Using Ping and TraceRoute to check host availability and network connection issues.
Solutions for issues related to accessing the configuration interface or forgotten IP addresses.
To Next Page
General
