LTE CPE B2368 User's
Guide Static routing 7
Issue 01 Copyright © Huawei Technologies Co., Ltd. 62
7 static routing 7 static routing
7.1 Overview
LTE modem normally uses the default gateway to route outgoing traffic from computers on the LAN to the
Internet. To make LTE modem to send data to the devices that are not available through the default gateway,
use static routing.
For example, the following image is a computer ( AND) connected to the LAN interface LTE modem. LTE modem For example, the following image is a computer ( AND) connected to the LAN interface LTE modem. LTE modem For example, the following image is a computer ( AND) connected to the LAN interface LTE modem. LTE modem
communication channels most from your computer AND on the internet through the default gateway LTE modem ( R1).communication channels most from your computer AND on the internet through the default gateway LTE modem ( R1).communication channels most from your computer AND on the internet through the default gateway LTE modem ( R1).communication channels most from your computer AND on the internet through the default gateway LTE modem ( R1).
One static routing to create a connection to the services offered by your ISP - R2. Another route to create a One static routing to create a connection to the services offered by your ISP - R2. Another route to create a One static routing to create a connection to the services offered by your ISP - R2. Another route to create a One static routing to create a connection to the services offered by your ISP - R2. Another route to create a
separate communication networks for a router connected to the local network - R3.separate communication networks for a router connected to the local network - R3.separate communication networks for a router connected to the local network - R3.
Figure 7-1 Example static routing topology Figure 7-1 Example static routing topology
To Next Page
Loading...
