LTE CPE B2368 User's
Guide 8 Network Address Translation (NAT)
Issue 01 Copyright © Huawei Technologies Co., Ltd. 69
Item Description
eliminate rules move one position up.
8.2.2 Screen Edit Port Forwarding
The following screen is used to add new or edit an existing port forwarding rules. Click on the button Add new The following screen is used to add new or edit an existing port forwarding rules. Click on the button Add new
rule on the screen port forwarding or click adjust in line with the existing rule. rule on the screen port forwarding or click adjust in line with the existing rule. rule on the screen port forwarding or click adjust in line with the existing rule. rule on the screen port forwarding or click adjust in line with the existing rule. rule on the screen port forwarding or click adjust in line with the existing rule. rule on the screen port forwarding or click adjust in line with the existing rule.
Figure 8-3 Port Forwarding: Add / Edit Figure 8-3 Port Forwarding: Add / Edit
The following table summarizes the available fields on this screen.
Table 8-2 Port Forwarding: Add / Edit Table 8-2 Port Forwarding: Add / Edit
Item Description
service name Names forwarding rule using standard symbols (A - Z, and - of 1 - 2 etc.). Names forwarding rule using standard symbols (A - Z, and - of 1 - 2 etc.). Names forwarding rule using standard symbols (A - Z, and - of 1 - 2 etc.). Names forwarding rule using standard symbols (A - Z, and - of 1 - 2 etc.). Names forwarding rule using standard symbols (A - Z, and - of 1 - 2 etc.). Names forwarding rule using standard symbols (A - Z, and - of 1 - 2 etc.). Names forwarding rule using standard symbols (A - Z, and - of 1 - 2 etc.).
WAN interface Identification of the WAN interface through which the service is diverted.
Initial WAN port
The default destination port of data packets.
To forward only one port, enter the same port number also in the field WAN port To forward only one port, enter the same port number also in the field WAN port
terminal.
To redirect a range of ports, type in the box number of the start port and end
port number field, enter WAN port terminal.port number field, enter WAN port terminal.
To Next Page
Loading...
