LTE CPE B2368 User's
Guide 6 Setting up a home network
Issue 01 Copyright © Huawei Technologies Co., Ltd. 59
Item Description
MAC address
Each device on the LAN has a unique MAC address (Media Access Control), which
consists of six pairs of hexadecimal digits separated by colons.
Network interface card, eg. Ethernet adapter has a fixed address. This address is
assigned based on the industry standard, which ensures that no other adapter has
a similar address.
IP address IP address of the device.
Book
By checking this box you book the IP address for the device (based on MAC
addresses and host names). If you check the box in the table header will be
reserved IP addresses for all devices on the list. The table can be located up to 128
entries.
Use Clicking Use save your changes. Clicking Use save your changes. Clicking Use save your changes.
Cancel Click on Cancel restore previous settings in this section. Click on Cancel restore previous settings in this section. Click on Cancel restore previous settings in this section.
Restore
Clicking Restore make reload the DHCP table. Clicking Restore make reload the DHCP table. Clicking Restore make reload the DHCP table.
If you click on the button Add new lending static (static lease) on the screen static DHCP the following If you click on the button Add new lending static (static lease) on the screen static DHCP the following If you click on the button Add new lending static (static lease) on the screen static DHCP the following If you click on the button Add new lending static (static lease) on the screen static DHCP the following If you click on the button Add new lending static (static lease) on the screen static DHCP the following
dialog box.
Figure 6-4 Static DHCP: Add new lending static (static lease) Figure 6-4 Static DHCP: Add new lending static (static lease)
The following table summarizes the available fields on this screen.
Table 6-3 Static DHCP: Add new lending static (static lease) Table 6-3 Static DHCP: Add new lending static (static lease)
Item Description
MAC Address Enter the MAC address of the device you want to add.
IP address
Enter the IP address you want the device with the MAC address on the network assigned.