Huawei BYPASS OP9000 - Figure 3-5 Managing Fibers in the Front Board Area

BYPASS OP9000
Performance and Features 3 Working Principle and Functions
Document Version
T2-0416xx-20050330-C-1.20
(March 2005)
HUAWEI TECHNOLOGIES CO.,
LTD.
- 3-12 -
Error! Reference source not found. shows the method of managing fibers in the
front board area.
fiber frame
fiber
Figure 3-5 Managing fibers in the front board area

All the optical interfaces of the BYPASS OP9000 are on the front panels of
boards in the front board area. All the fibers should be routed to the front
board area from the right of the chassis and then connected to the
corresponding optical interfaces.

Fibers connected to the optical interfaces on boards in slot IU1 – IU5 should
pass through the holes on the fiber frames.