BYPASS OP9000
Performance and Features 3 Working Principle and Functions
Document Version
T2-0416xx-20050330-C-1.20
(March 2005)
HUAWEI TECHNOLOGIES CO.,
LTD.
- 3-8 -
Optical interfaces on the front panel:
Optical interfaces Connector type Description
RO1
RO2
LC Transmit signal after selected
TI1
TI2
LC Receive signal to be protected
TO11
TO12
TO21
TO22
LC
Connected with both active/standby optical fibers to transmit
at transmitting end
RI11
RI12
RI21
RI22
LC
Connected with both active/standby optical fibers to receive at
receiving end
Slot Assignment:
IU1-IU4
Weight:
280 g
Maximum power consumption at 25
0
C
2 W
3.3 Installing Optical Fiber
3.3.1 Fiber Connector
BYPASS OP9000 uses the optical fiber with LC/PC connector as shown in Figure
3-3。
To Next Page
Loading...
