eA660 Series CPE
User Guide
4 Configuration Introduction
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
f. On the screen that is displayed, choose Yes, I want to configure these settings now and
click Next.
g. Set the default gateway.
Figure 4-8 Setting the default gateway.
h. Click Next on each of the following pages and then click Finish.
Add a route from the DHCP server to the CPE. The next hop is the EPC's IF IP address.
Figure 4-9 Next hop
Add a route from the DHCP server to LAN devices connected to the CPE. The next hop
is the EPC's IF IP address.
To Next Page
Loading...
