eA660 Series CPE
User Guide
4 Configuration Introduction
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 4-10 Next hop
9 Log in to the WebUI, Please refer to the procedure 错误!未找到引用源。
10 Go to LAN > DHCP Settings > DHCP Relay, set DHCP Server Address, and click
Submit.
Figure 4-11 Setting the DHCP server address
11 Go to Security > NAT Settings, deselect Enable under NAT, and click Submit to
enable Routing Behind MS.
To Next Page
Loading...
