Huawei FusionServer Pro 1288H V5 - Page 52

Category Specications
For details about the RAID controller card, see
Huawei V5 Server RAID Controller Card User
Guide.
NOTE
If the BIOS is in legacy mode, the 4K drive cannot be used as
the boot drive.
Network Supports expansion capability of multiple types of
networks.
● LOM
– Supports two 10GE optical ports and two GE
electrical ports via the NIC chip integrated on the
mainboard.
– Supports two 10GE electrical ports and two GE
electrical ports via the NIC chip integrated on the
mainboard.
– The LOM ports support NC-SI, WOL, and PXE.
● FlexIO card
– Supports on-demand
conguration.
– Supports a variety of FlexIO cards. Use the
Intelligent Computing Compatibility Checker
to obtain information about the
specic FlexIO
cards supported.
NOTE
● The electrical ports provided by NICs and FlexIO cards
cannot be connected to PoE devices (such as a switch with
PoE enabled). Connecting such a port to a PoE device may
cause link communication failure or even damage the NIC.
● Forcibly powering
o a server will cause intermittent NC-SI
disconnection and disable the WOL function of the LOM
ports. To restore the NC-SI connection, refresh the iBMC
WebUI.
I/O expansion
5 PCIe 3.0 slots:
● One slot dedicated for a RAID controller card, one
dedicated for a FlexIO card, and three for standard
PCIe cards.
For details, see 2.7.2 PCIe Slots and 2.7.3 PCIe Slot
Description.
● Support Huawei proprietary PCIe SSD cards to
bolster I/O performance for applications such as
searching, caching, and download services.
● Supports GPU cards.
NOTE
The preceding information is for reference only. Use the
Intelligent Computing Compatibility Checker to obtain
specic information.
FusionServer Pro 1288H V5 Server
User Guide 3 Product Specications
Issue 13 (2020-06-05) Copyright © Huawei Technologies Co., Ltd. 44