Figure 7-19 Removing a cable (for an IB NIC with two 56 Gbit/s ports as an
example)
2. Connect the new cable.
Remove the dust-proof cap on the port, and insert the cable connector into
the port. When you hear a "click" and the cable cannot be pulled out, the
connector is secured.
Figure 7-20 Connecting a cable (for an IB NIC with two 56 Gbit/s ports as an
example)
Step 5 Check whether the new cable is properly connected.
FusionServer Pro 1288H V5 Server
User Guide 7 Installation and Conguration
Issue 13 (2020-06-05) Copyright © Huawei Technologies Co., Ltd. 77
To Next Page
Loading...
