Figure 9-15 PuTTY Conguration
Step 6 Set Close window on exit to Only on clean exit.
Set Saved Sessions and click Save. You can double-click the saved record in Saved Sessions
to log in to the server next time.
Step 7 Click Open.
The PuTTY screen is displayed. Then the message "login as:" is displayed,
prompting you to enter a user name.
If this is your rst login to the server, the PuTTY Security Alert dialog box is displayed.
Click Yes to proceed.
Step 8 Enter the user name and password.
If the login is successful, the server host name is displayed on the left of the
prompt.
----End
FusionServer Pro 2288X V5 Server
User Guide 9 Common Operations
Issue 04 (2020-06-05) Copyright © Huawei Technologies Co., Ltd. 131
To Next Page
Loading...
