3 GE LOM port connection
status indicator
NOTE
The indicator is reserved.
4 Fault diagnosis LED
5 Health status indicator 6 UID button/indicator
7 Power button/indicator - -
Indicator and Button Description
Table 2-1 Indicators and buttons on the front panel
Silkscreen Indicator/
Button
Description
Fault
diagnosis LED
● ---: The device is operating normally.
● Fault code: A component is faulty.
For details about error codes, see
FusionServer Pro Rack Server iBMC Alarm
Handling.
Power
button/
indicator
Power indicator:
● O: The device is not powered on.
● Steady green: The device is powered on.
● Blinking yellow: The power button is locked.
The power button is locked when the iBMC
is starting.
● Steady yellow: The device is ready to power
on.
Power button:
● When the device is powered on, you can
press this button to gracefully shut down
the OS.
● When the device is powered on, holding
down this button for 6 seconds will forcibly
power
o the device.
● When the power indicator is steady green,
you can press this button to power on the
device.
FusionServer Pro 2288X V5 Server
User Guide 2 Hardware Description
Issue 04 (2020-06-05) Copyright © Huawei Technologies Co., Ltd. 8
To Next Page
Loading...
