● Ensure that the angle between two hoisting ropes is no more than 90
degrees, as shown in the following gure.
Using Ladders
● Use wooden or
berglass ladders when you need to perform live working at
heights.
● When a step ladder is used, ensure that the pull ropes are secured and the
ladder is held
rm.
● Before using a ladder, check that it is intact and conrm its load bearing
capacity. Do not overload it.
● Ensure that the wider end of the ladder is at the bottom, or protective
measures have been taken at the bottom to prevent the ladder from sliding.
● Ensure that the ladder is securely positioned. The recommended angle for a
ladder against the
oor is 75 degrees, as shown in the following gure. An
angle ruler can be used to measure the angle.
LUNA2000-200KTL-H0 Smart Power Control System
User Manual 1 Safety Information
Issue 05 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 5
To Next Page
Loading...