Figure 5-12 Multi-core cable connections
It is recommended that the stripped length of the L2 wire be 15 mm shorter than that of
the L1 or L3 wire.
----End
5.8 Connecting FE Communications Cables
● The Smart PCS is connected to the SmartModule through FE communications
cables. Ensure that the FE ports on the two ends are connected to GE2 and GE3
of the SmartModule.
● For multiple Smart PCSs, connect all Smart PCSs in hand-in-hand mode
through FE communications cables into a ring network.
● The FE communications cable delivered with the Smart PCS is 1.2 m long. Use
the original cable if possible.
LUNA2000-200KTL-H0 Smart Power Control System
User Manual 5 Electrical Connections
Issue 05 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 39
To Next Page
Loading...