Communication Port Description
Figure 5-13 Port description
(1) Network port 2 (FE2) (2) Network port 1 (FE1) (3) Communications port
(COM) (reserved)
Figure 5-14 Communications cable connection
Procedure
Step 1 Remove an appropriate length of the insulation layer from the shielded network
cable using a wire stripper.
Step 2 Insert the shielded network cable through the sealing nut, seal ring, coupling nut,
and plastic housing in sequence.
Figure 5-15 Waterproof RJ45 connector composition
LUNA2000-200KTL-H0 Smart Power Control System
User Manual 5 Electrical Connections
Issue 05 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 40
To Next Page
Loading...