Huawei LUNA2000-200KTL-H0 - Powering On the Smart PCS; Power-On Procedure

7 Powering On the Smart PCS
Ensure that all the preceding items are checked and meet requirements before
power-on.
Precautions
NO TICE
● Before turning on the AC switch between the Smart PCS and the power grid,
check whether the AC voltage is within the required range using a multimeter.
(See the local power grid standard.)
● If the Smart PCS has not been used for six months or longer after being
installed, it must be checked and tested by professionals before operation.
Procedure
Step 1 Turn on the AC switch between the AC side of the Smart PCS and the power grid.
Step 2 Turn on the DC switch between the DC side of the Smart PCS and the DC LV Panel
busbar.
Step 3 Deliver a startup command on the SUN2000 app, SmartLogger, or the
management system, and wait for the system soft start.
Step 4 Observe the LED indicators to check the running status of the Smart PCS.
----End
Indicator Description
● You can view the running status of the Smart PCS by observing the LED
indicators on the panel.
LUNA2000-200KTL-H0 Smart Power Control System
User Manual 7 Powering On the Smart PCS
Issue 05 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 46