EasyManua.ls Logo

Huawei LUNA2000-200KTL-H0 - Electrical Safety

Huawei LUNA2000-200KTL-H0
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Only qualied professionals or trained personnel are allowed to install,
operate, and maintain the equipment.
Only qualied professionals are allowed to remove safety facilities and inspect
the equipment.
Personnel who will operate the equipment, including operators, trained
personnel, and professionals, should possess all relevant local or nationally
required
qualications for special operations (including high-voltage
operations, working at heights, and operation of special equipment).
Only professionals or authorized personnel should replace equipment or
components (including software).
NO TE
Professionals: personnel who are trained or experienced in equipment operations
and fully understand the potential hazards involved in equipment installation,
operation, and maintenance
Trained personnel: personnel who are technically trained, have the required
experience, are aware of potential hazards during certain operations, and are able
to take protective measures to minimize any hazards to themselves and others
Operators: operations personnel who may come in contact with the equipment,
but excluding trained personnel and professionals
1.3 Electrical Safety
Grounding
For the equipment that needs to be grounded, install the ground cable
rst
when installing the equipment and remove the ground cable last when
removing the equipment.
Do not damage the ground conductor.
Do not operate the equipment in the absence of a properly installed ground
conductor.
Ensure that the equipment is connected permanently to the protective
ground. Before operating the equipment, check its electrical connection to
ensure that it is reliably grounded.
General Requirements
D ANGER
Before connecting cables, ensure that the equipment is intact. Otherwise, electric
shocks or re may occur.
Ensure that all electrical connections comply with local electrical standards.
Obtain approval from the local electric utility company before connecting the
equipment to the grid.
Ensure that the cables you have prepared meet local regulations.
Use dedicated insulated tools when performing high-voltage operations.
LUNA2000-200KTL-H0 Smart Power Control System
User Manual 1 Safety Information
Issue 05 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 3

Table of Contents

Related product manuals