Figure 2-6 Circuit Diagram
2.4.2 Working Modes
The Smart PCS can work in standby, operating, or shutdown mode.
Figure 2-7 Working mode
Table 2-3 Working mode description
Working
Modes
Description
Standby The Smart PCS enters Standby mode when the external
environment does not meet the operating requirements. In standby
mode:
● The Smart PCS continuously performs status check and enters
Operating mode once the operating requirements are met.
● The Smart PCS enters Shutdown mode upon receiving a
shutdown command or detecting a fault after startup.
LUNA2000-200KTL-H0 Smart Power Control System
User Manual 2 Product Overview
Issue 05 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 12
To Next Page
Loading...