Figure 5-10 Multi-core cable connections (not recommended)
----End
5.7 Connecting AC Power Cables
Precautions
A three-phase AC switch should be installed on the AC side of the Smart PCS. To
ensure that the Smart PCS can safely disconnect itself from the power grid if an
exception occurs, select a proper overcurrent protection device in compliance with
local power distribution regulations.
Do not connect loads between the Smart PCS and the AC switch.
LUNA2000-200KTL-H0 Smart Power Control System
User Manual 5 Electrical Connections
Issue 05 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 37
To Next Page
Loading...