Huawei LUNA2000-200KTL-H0 - Setting Power Adjustment Parameters

No. Category Parameter Description Remarks
63 Quit frequency
of
underfrequency
rise power (Hz)
Species the exit frequency of
power raising caused by
underfrequency.
64 O&M via USB
connection
O&M via USB
connection
Set the USB O&M port status
to Always On or Always
OFF.
-
8.2.4 Setting Power Adjustment Parameters
Procedure
Step 1 On the home screen, tap Power adjustment to go to the parameter setting
screen.
Figure 8-7 Power adjustment parameters (installer)
----End
Parameters
No.
Category Parameter Description Remarks
1 Remote control Remote power
schedule
If this parameter is set to
Enable, the device responds to
the scheduling instruction from
the remote port. If this
parameter is set to Disable, the
device does not respond to the
scheduling instruction from the
remote port.
-
LUNA2000-200KTL-H0 Smart Power Control System
User Manual 8 Device Commissioning
Issue 05 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 69