Huawei LUNA2000-200KTL-H0 - Typical Application Scenarios

Working
Modes
Description
Operating In operating mode:
● The Smart PCS controls charge and discharge based on system
commands.
● The Smart PCS enters Shutdown mode after detecting a fault or
receiving a shutdown command.
Shutdown ● In Standby or Operating mode, the Smart PCS enters Shutdown
mode after detecting a fault or receiving a shutdown command.
● In Shutdown mode, the Smart PCS enters Standby mode when
a startup command is received and faults are rectied, the DC
power is insucient, or the DC external switch is turned o.
2.5 Typical Application Scenarios
The system consists of the Smart ESS (including the Smart Rack Controller), DC LV
Panel, Smart PCS, Smart Transformer Station, Distribution Transformer, and step-
up transformer.
Figure 2-8 Networking application
(A) Smart ESS
(B) DC LV Panel (C) Smart PCS
(D) Smart Transformer Station
(STS)
(G) Management system
(E) Step-up transformer
(H) Smart Array Controller
(F) Power grid
(I) Distribution Transformer
LUNA2000-200KTL-H0 Smart Power Control System
User Manual 2 Product Overview
Issue 05 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 13