c. Keep the mobile phone within 5 m of the Smart PCS to ensure good
communication between them.
Procedure
Step 1 In the SUN2000 app, select a connection mode.
● The screenshots in this section correspond to the SUN2000 app 6.22.10.116 (Android).
● If using a WLAN connection, scan the QR code of the WLAN module to access the login
screen.
● If using a WLAN connection, the initial name of the WLAN hotspot is Adapter-WLAN
module SN and the initial password is Changeme. Use the initial password upon rst
power-on and change it immediately after login. To ensure account security, change the
password periodically and do not forget the new password. Passwords that are left
unchanged for a long period of time may become vulnerable to theft or cracking. If a
password is lost, the associated device can no longer be accessed. In such cases, the
Company will not be liable for any loss incurred by the plant.
Figure 8-2 Selecting a connection mode
Step 2 Select the login user and enter the login password. The main menu page is
displayed.
LUNA2000-200KTL-H0 Smart Power Control System
User Manual 8 Device Commissioning
Issue 05 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 51
To Next Page
Loading...