EasyManua.ls Logo

Huawei LUNA2000-200KTL-H0 - Page 93

Huawei LUNA2000-200KTL-H0
115 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Alarm
ID
Alarm Name Severity Possible Cause Suggestion
2006 DC Short-
Circuited or in
Reverse Polarity
Major Cause ID = 1
The DC bus of the device is
short-circuited or
connected in reverse
polarity.
Power o the device (turn
o the AC and DC
switches, and wait for a
period specied on the
device safety warning
label), and then perform
the following operations:
Check whether the DC
terminals are short-
circuited or connected in
reverse polarity. If yes,
adjust the DC bus cable
connection.
2007 DC Connected in
Series
Major Cause ID = 1
The DC buses of the device
are connected in series.
Power o the device (turn
o the AC and DC
switches, and wait for a
period specied on the
device safety warning
label), and then perform
the following operations:
Check whether the DC
terminals are connected in
series. If yes, adjust the DC
bus cable connection.
2008 DC Bus Not
Securely
Connected
Major Cause ID = 1
The DC bus of the device is
not securely connected.
Power o the device (turn
o the AC and DC
switches, and wait for a
period specied on the
device safety warning
label), and then perform
the following operations:
Check whether the DC
terminals are connected
securely. If not, adjust the
DC bus cable connection.
2031 Phase Wire Short-
Circuited to PE
Major Cause ID = 1
The phase wire is short-
circuited to PE or its
impedance to PE is low.
Check the impedance of
the phase wire to PE,
locate the position with
low impedance, and
rectify the fault.
LUNA2000-200KTL-H0 Smart Power Control System
User Manual 10 Alarm Reference
Issue 05 (2022-06-30) Copyright © Huawei Technologies Co., Ltd. 87

Table of Contents

Related product manuals