OptiX RTN 600
Product Description
Commercial in Confidence Page 23 of 44
signal from the ODU , it selects the better-quality signal transmitted from the other unit.
The cross-connect unit always selects the service signal from the active IF unit.
Note:
1+1 SD is compatible with HSB. If the active IF unit or the active ODU becomes
faulty, the cross-connect unit selects the service signal from the standby IF unit.
The HSB switching can interrupt services.
1+1 SD also supports reverse switching. The HSB can be triggered when the local
NE receives the RDI signal coming from the remote NE.
To Next Page