PDU8000 Modular Precision PDC V2.0
User Manual
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 8-24 Adding an MCB
Step 9 (Optional) If an MCB is incorrectly set, tap the MCB and then tap Modify to correct the
phases and capacity.
Figure 8-25 Modifying MCB settings
Step 10 (Optional) If more MCBs are added than necessary, tap the extra MCB and then tap Delete.
Figure 8-26 Deleting an MCB
Step 11 After verifying that all added MCBs are correctly set, tap Save Settings.
Step 12 The MDU automatically restarts, and the capacity expansion setting is complete.
To Next Page
Loading...