PDU8000 Modular Precision PDC V2.0
User Manual
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
The PDC weighs about 400 kg. Take protective measures during movement to prevent
toppling and bumping.
Procedure
Step 1 Remove the two L-shaped brackets between the front and rear door sills of the PDC and the
pallet, as shown by (1) and (2) in Figure 5-1.
Figure 5-1 Removing L-shaped brackets
Step 2 Use diagonal pliers to cut off the binding straps securing the unloading ramps, and take out
the unloading ramps on both sides, as shown by (3) in Figure 5-1.
Step 3 Clip the unloading ramps to the wooden pallet.
To Next Page
Loading...